Steel Shot

Our company produces steel shot according to SAE J444/J827. Used for preparation of metallic surfaces before painting and coating, cleaning of metallic products, surface hardening of heavily loaded parts.

Product Details

* On client's request, it is also possible to produce steel shot with different chemical composition and physical characteristics.

Shot Number	Sieve Opening Standard (mm)	Percentage
S 70	0.425	All Pass
	0.355	max. 10%
	0.180	min. 80%
	0.125	min. 90%
S 110	0.600	All Pass
	0.500	max. 10%
	0.300	min. 80%
	0.180	min. 90%
S 170	0.850	All Pass
	0.710	max. 10%
	0.425	min. 85%
	0.355	min. 97%
S 230	1.000	All Pass
	0.850	max. 10%
	0.600	min. 85%
	0.500	min. 97%
S 280	1.180	All Pass
	1.000	max. 5%
	0.710	min. 85%
	0.600	min. 96%
S 330	1.400	All Pass
	1.180	max. 5%
	0.850	min. 85%
	0.710	min. 96%
S 390	1.700	All Pass
	1.400	max. 5%
	1.000	min. 85%
	0.850	min. 96%
S 460	2.000	All Pass
	1.700	max. 5%
	1.180	min. 85%
	1.000	min. 96%
S 550	2.000	All Pass
	1.400	min. 85%
	1.180	min. 97%
S 660	2.360	All Pass
	1.700	min. 85%
	1.400	min. 97%
S 780	2.800	All Pass
	2.000	min. 85%
	1.700	min. 97%
S 930	3.350	All Pass
	2.360	min. 90%
	2.000	min. 97%
S 1110	4.000	All Pass
	2.800	min. 90%
	2.360	min. 97%
S 1320	4.750	All Pass
	3.350	min. 90%
	2.800	min. 97%

Element	Percentage
Carbon (C)	0.80 - 1.20 %
Silicon (Si)	min. 0.4 %
Manganese (Mg)	0.60 - 1.20 %
Phosphorus (P)	max. 0.05 %
Sulfur (S)	max. 0.05 %
Ferrum (Fe)	balance

Parameter	Value
Hardness	390 - 530 HV
Density	min. 7200 kg/m³
Microstructure	fine grained martensite + bainite